Recycling results
VANA has entered into agreements with a wide range of treatment facilities, which since October 2025 have ensured the best possible sorting and recycling of packaging waste. Based on the suppliers' reported recycling results for Q4 2025, VANA can now publish the recycling results for all treated fractions.
With the takeover of the practical handling of the collected packaging from the municipalities, VANA is also responsible for ensuring that the packaging is recycled based on the recycling targets set by the EU.
Recycling results by fractions
In the large table below, you can see an overview of the collection fractions and the percentage that has been sorted for recycling, sorted for incineration, as well as the actual recycling. The tables in the dropdown menus below show the sorting for recycling as well as VANA's calculations of the actual recycling for the individual fractions. The percentages for sorting and recycling are calculated in relation to the total quantity that VANA has been transferred from the municipalities.
VANA's sorting and actual recycling of cardboard and paper Q4 2025

The municipalities transfer the fractions cardboard and cardboard/paper to VANA. These originate from collection schemes from households and drop-off schemes to recycling centers.
Loss in the recycling of cardboard and cardboard/paper occurs in the form of manual or mechanical sorting out of mis-sorts in the fraction. During sorting, it is inevitable that some paper and cardboard will also be lost. For example, if all or part of a load must be discarded due to large amounts of mis-sorts.
When cardboard and paper end up at the paper mill and go into the pulper, 100% of the amount is considered recycled. This is despite the fact that there will actually be a loss of 2-9% in the form of ink, paper clips, and ordinary mis-sorts that are removed in the process.
VANA's sorting and actual recycling of glass and bottles in Q4 2025

The municipalities transfer the fractions, glass and bottles, to VANA. Glass comes from collection schemes from households. Bottles come from bring schemes to containers and recycling centers.
Losses in the recycling of glass and bottles occur during the mechanical sorting of contamination in the fraction, which mainly includes ceramics, porcelain, stone, plastic, and paper. When the contamination is ejected, some glass is inevitably lost as well. When glass reaches the glass furnace, 100% of the quantity is considered recycled.
VANA has a requirement for suppliers that the circular recycling, where glass is used for new packaging, must be a minimum of 70%. The remaining recycling can be downcycling for use in, for example, construction materials. The circular recycling is not yet accounted for in VANA's report, but it is expected to be significantly higher for bottles than for glass. The difference is due to the fact that glass, to a much greater extent than bottles, is crushed because of household collection in compactor trucks. This results in many smaller shards under 1 cm, which cannot be recycled into new glass packaging.
Particularly for the Capital Region
Bottles from the Capital Region are sent by VANA to a sorting facility that can sort out about 1/3 of the quantity as whole bottles (primarily wine bottles) for rinsing and reuse. The remaining glass is melted down to produce new packaging glass.
In addition to 1/3 of the quantity going to reuse, the gentler handling ensures a very high circular recycling rate for the remaining glass quantity due to a low crushing rate.
The sorting and real recycling of glass/metal by VANA in Q4 2025

Glass/metal primarily comes from collection schemes from households.
Loss in the recycling of bottles and glass occurs in two places. First at the mechanical sorting of the fraction into glass and various metals, where mis-sorts are discarded. Subsequently, glass and metals are further sorted at other sorting plants. For example, glass must be sorted free of ceramics, porcelain, and stone before it can be remelted.
When the glass and metals reach the melting furnace, 100% of the quantity is considered recycled.
The aforementioned requirements by VANA for suppliers regarding circular recycling of glass, which must be a minimum of 70%, also applies to glass/metal. The circular recycling of glass in glass/metal is lower than for whole bottles, as the glass is crushed to a much greater extent than bottles due to household collection in compactor trucks.
VANA's sorting and actual recycling of metal in Q4 2025

Metal primarily comes from collection schemes from households.
Loss in recycling occurs during the mechanical sorting of the fraction, where mis-sorting is removed.
When the sorted metals reach the smelter, 100% of the quantity is counted as recycled.
VANA's sorting and actual recycling of plastic, PMDK and PMMDK in Q4 2025

Plastic mainly comes from collection schemes from households. Almost all municipalities collect plastic mixed with MDK (PMDK), and some have also included metal in the fraction (PMMDK).
Loss in the recycling of plastic occurs in two places. First, during the mechanical sorting of the fraction into various types of plastic as well as any MDK and metals, where mis-sorts are discarded. Subsequently, the individual plastic types are further sorted at a number of recycling facilities. For example, sorted PE must be sorted again and washed to remove dirt, other plastic types, and mis-sorts. Only when plastic is ready to be included in an extrusion or pelleting process can the amount be counted as actually recycled.
VANA's sorting and real recycling of MDK in Q4 2025

MDK primarily originates from collection schemes from households. Only four municipalities in Denmark collect clean MDK, and the treatment results for these are shown in the table.
The table above pertains to MDK collected clean at households in 4 municipalities. These quantities have been earmarked for recycling throughout 2025.
Loss in the recycling of MDK occurs at the pulping plant, where MDK is added to the pulper so that the paper fibers can be dissolved. When extracting the fibers from MDK, polyal (the layers of plastic and aluminum in MDK) is left behind along with any sorting errors. Only a few facilities have the capability to recycle polyal, and VANA's suppliers do not have this option. Therefore, polyal goes to incineration, which pulls down the recycling rate of the fraction.
Particularly for 2025
In 2025, doubts arose from the Danish Environmental Protection Agency regarding whether MDK can be exported on the green list for recycling. Since no Danish sorting facilities have notification for MDK, the fraction at the end of 2025 and the beginning of 2026 has primarily been allocated for energy recovery. It has now been clarified that MDK can be exported on the green list, and an expert group has been established to assist the Danish Environmental Protection Agency in developing guidance on which purity criteria the fraction must comply with.
The unsatisfactory results for sorting and recycling of MDK in 2025, as shown in the section above on Plast, PMDK, and PMMDK, should therefore be viewed in light of the unresolved export situation and the resulting need to allocate large quantities for energy recovery. In practice, 100% of the MDK collected separately at households has been sent for recycling, while the same is only true for a very small proportion of MDK collected together with plastic.
How is actual recycling calculated?
The method for calculating the actual recycling for packaging fractions is described in the EU Commission's implementing decision (Danish). It describes calculation points for the individual fractions, i.e., when the material is considered recycled. If there is loss or sorting of materials before the calculation point, it must be deducted from the calculation of actual recycling.